discovery 1 build

[Pieter_Macdonald]

I have recently acquired 2 discovery 1's from my dad, one with a v8 (the green one) and the other with a 300 tdi and 5 speed r380 transmission with a salvage title (the blue one). I plan to convert the green one to a 300 tdi with the parts from the other truck.

image3.jpeg

(477.61 KiB) Downloaded 377 times

IMG_7161.jpg

(444.55 KiB) Downloaded 376 times

image2.jpeg

(425.38 KiB) Downloaded 381 times

So far I have removed both motors and torn the interior out of the green truck as I plan on repainting it. Unfortunately, but not surprisingly I have also discovered (no pun intended) :D quite a bit of rust that will need to be repaired before I put in the new motor.

image0.jpeg

(547.87 KiB) Downloaded 374 times

Some fun but unnecessary things I've done are put the steel wheels on and start on a stainless steel raised air intake.

image1.jpeg

(301.85 KiB) Downloaded 378 times

I will add to this forum as progress continues.

[rgallant]

Be interesting to see how this goes, good luck

[bclandrover]

//uploads.tapatalk-cdn.com/202003 ... 3b20bc.jpg

I swear I didn’t put him up to this!!


Sent from my iPhone using Tapatalk

[rgallant]

Great picture!

[BjornErickson]

this is what I hope to do one day cant wait to see how it turns out!

[Pieter_Macdonald]

More Progress!!
I have now almost fully taken out the interior and wiring harness.

IMG_4688.JPG

(488.09 KiB) Downloaded 301 times

I have found more rust in various places which I'm not too happy about, but I've seen worse so I think I got lucky.

IMG_4685.JPG

(375.03 KiB) Downloaded 306 times

IMG_4686.JPG

(401 KiB) Downloaded 302 times

There are other rust holes as well but I don't have photos of them.

[Pieter_Macdonald]

I have now started the task of rust repair. I have taken out the drivers-side inner fender by drilling out many spot welds and peeling away tons of seem sealer Intel it came out. I then made a cardboard template and made a new piece out of fresh metal.

IMG_4758.JPG

(393.62 KiB) Downloaded 304 times

IMG_4757.JPG

(392.43 KiB) Downloaded 302 times

IMG_4756.JPG

(418.71 KiB) Downloaded 304 times

I haven't quite finished it but I got it test fitted in the truck and it sorta fits!!

[TylerN]

Whatever happened to this build? I’d love to see more!