Sweet Darlin' 1953 80" Station Wagon

Use this forum to post your description of ongoing projects. Please make sure your photos are sized sensibly for the web!
Post Reply
Message
Author
InterMechanico
Little Wheel
Posts: 85
Joined: Sun Oct 11, 2020 4:53 pm

Sweet Darlin' 1953 80" Station Wagon

#1 Post by InterMechanico » Fri Oct 23, 2020 1:01 pm

I've been keeping this one under my hat for a little while, but please meet my long term project!!! We're on our way back to town now. This is another Thormanby Island rover, and it definitely has sentimental value. The previous owner was a fantastic human being; very kind, old school type of person.

She is a 1953 80" Station Wagon. She's pretty much complete, and is an original Vancouver car. Was running when parked.

The engine turns; I believe it'll even run with some care, but it's not really driveable so why start it up. Engine parts are way too hard to come by!

Any advice on not botching this is appreciated. Rushing into it is out of the question. I've learned from old mistakes :roll:


Have a great weekend everyone!!
Top
Roadqueen17
Worm Gear
Posts: 183
Joined: Mon Nov 27, 2017 5:16 pm
Location: Burnaby

Re: Sweet Darlin' 1953 80" Station Wagon

#2 Post by Roadqueen17 » Fri Oct 23, 2020 2:38 pm

Sounds great...any pictures would be appreciated by all!
Top
InterMechanico
Little Wheel
Posts: 85
Joined: Sun Oct 11, 2020 4:53 pm

Re: Sweet Darlin' 1953 80" Station Wagon

#3 Post by InterMechanico » Fri Oct 23, 2020 5:31 pm

Absolutely impossible from the mobile phone, Friends!

However, give me a few moments...
Top
InterMechanico
Little Wheel
Posts: 85
Joined: Sun Oct 11, 2020 4:53 pm

Re: Sweet Darlin' 1953 80" Station Wagon

#4 Post by InterMechanico » Fri Oct 23, 2020 5:46 pm

this will take a few
Attachments
20201023_090927.jpg
(577.44 KiB) Downloaded 728 times
20201023_100226-1.jpg
(560.57 KiB) Downloaded 730 times
Top
InterMechanico
Little Wheel
Posts: 85
Joined: Sun Oct 11, 2020 4:53 pm

Re: Sweet Darlin' 1953 80" Station Wagon

#5 Post by InterMechanico » Fri Oct 23, 2020 5:47 pm

a few more
Attachments
20201023_085055.jpg
(404.26 KiB) Downloaded 717 times
20201023_085101.jpg
(389.74 KiB) Downloaded 726 times
20201023_085124.jpg
(424.52 KiB) Downloaded 722 times
Top
InterMechanico
Little Wheel
Posts: 85
Joined: Sun Oct 11, 2020 4:53 pm

Re: Sweet Darlin' 1953 80" Station Wagon

#6 Post by InterMechanico » Fri Oct 23, 2020 5:48 pm

And a few more here
Attachments
20201023_085129.jpg
(283.41 KiB) Downloaded 721 times
20201023_085135.jpg
(450.27 KiB) Downloaded 727 times
20201023_100247.jpg
(595.07 KiB) Downloaded 733 times
Top
ANDYD
Defender of the World
Posts: 3075
Joined: Tue Mar 09, 2004 10:45 pm
Location: Sunny Steveston BC

Re: Sweet Darlin' 1953 80" Station Wagon

#7 Post by ANDYD » Fri Oct 23, 2020 7:56 pm

Very Nice, an Oldie but a Goodie as they say ...
Top
RobinS
Over Inflated
Posts: 177
Joined: Thu Oct 17, 2019 8:47 am
Location: Duncan B.C.

Re: Sweet Darlin' 1953 80" Station Wagon

#8 Post by RobinS » Sat Oct 24, 2020 7:44 am

Never use the capstan fairlead roller as a towing hook. It will bend and or break
Top
InterMechanico
Little Wheel
Posts: 85
Joined: Sun Oct 11, 2020 4:53 pm

Re: Sweet Darlin' 1953 80" Station Wagon

#9 Post by InterMechanico » Sat Oct 24, 2020 9:04 am

Noted. Thank you Robin
Top
InterMechanico
Little Wheel
Posts: 85
Joined: Sun Oct 11, 2020 4:53 pm

Re: Sweet Darlin' 1953 80" Station Wagon

#10 Post by InterMechanico » Sat Apr 03, 2021 6:24 pm

Following up on the project. I figure maybe some.of you could use a little good news and inspiration!

I began the teardown of the 80" this weekend, and should have everything done to major components by days end Sunday.

A couple of positives to mention:

The chassis is actually in really good shape, and is easily repairable. I'm obviously very happy about this. The awful rust I had thought I was up against is only 36" of the RH chassis rail just behind the fuel tank. The bulkhead outriggers, the forward fuel tank outrigger and the outer portions of the rear crossmember require replacement, but everything else is super solid :D

It looks as though all the driveline from engine to axles is original to the truck, and visually in absolutely stellar condition.

Chassis #36133407
Engine #36137081
Transmission #57100755 (early failure maybe?)
Front Axle #36137069
Rear Axle #36115xxx

Here are some pictures for you fine folks!
Top
InterMechanico
Little Wheel
Posts: 85
Joined: Sun Oct 11, 2020 4:53 pm

Re: Sweet Darlin' 1953 80" Station Wagon

#11 Post by InterMechanico » Sat Apr 03, 2021 6:25 pm

Some pictures....
Attachments
20210402_102350.jpg
(228.52 KiB) Downloaded 573 times
20210402_102400.jpg
(288.63 KiB) Downloaded 562 times
20210402_102425.jpg
(240.21 KiB) Downloaded 564 times
Top
InterMechanico
Little Wheel
Posts: 85
Joined: Sun Oct 11, 2020 4:53 pm

Re: Sweet Darlin' 1953 80" Station Wagon

#12 Post by InterMechanico » Sat Apr 03, 2021 6:26 pm

And some more...
Attachments
20210402_114726.jpg
(261.17 KiB) Downloaded 564 times
20210402_114738.jpg
(260.09 KiB) Downloaded 569 times
20210402_114731.jpg
(278.54 KiB) Downloaded 577 times
20210402_114822.jpg
(254.98 KiB) Downloaded 562 times
20210402_114835.jpg
(283.71 KiB) Downloaded 557 times
Top
InterMechanico
Little Wheel
Posts: 85
Joined: Sun Oct 11, 2020 4:53 pm

Re: Sweet Darlin' 1953 80" Station Wagon

#13 Post by InterMechanico » Sat Apr 03, 2021 6:27 pm

And some more more....
Attachments
20210402_123338.jpg
(287.58 KiB) Downloaded 564 times
20210402_132234.jpg
(250.22 KiB) Downloaded 563 times
20210402_132342.jpg
(317.71 KiB) Downloaded 578 times
20210402_132359.jpg
(314.36 KiB) Downloaded 571 times
Top
InterMechanico
Little Wheel
Posts: 85
Joined: Sun Oct 11, 2020 4:53 pm

Re: Sweet Darlin' 1953 80" Station Wagon

#14 Post by InterMechanico » Sat Apr 03, 2021 6:29 pm

And some more more more...
Attachments
20210402_152814.jpg
(261.41 KiB) Downloaded 569 times
20210402_162514.jpg
(294.22 KiB) Downloaded 577 times
20210402_162520.jpg
(344.08 KiB) Downloaded 572 times
20210402_175731.jpg
(325.24 KiB) Downloaded 570 times
20210402_175738.jpg
(318.51 KiB) Downloaded 577 times
Top
InterMechanico
Little Wheel
Posts: 85
Joined: Sun Oct 11, 2020 4:53 pm

Re: Sweet Darlin' 1953 80" Station Wagon

#15 Post by InterMechanico » Sat Apr 03, 2021 6:31 pm

How about a couple more? 8)
Attachments
20210402_175746.jpg
(311.54 KiB) Downloaded 574 times
20210402_175751.jpg
(286.94 KiB) Downloaded 561 times
20210402_175807.jpg
(297.45 KiB) Downloaded 573 times
20210402_175818.jpg
(250.6 KiB) Downloaded 580 times
20210402_175913.jpg
(290.57 KiB) Downloaded 571 times
Top
InterMechanico
Little Wheel
Posts: 85
Joined: Sun Oct 11, 2020 4:53 pm

Re: Sweet Darlin' 1953 80" Station Wagon

#16 Post by InterMechanico » Sat Apr 03, 2021 6:37 pm

Some shafts and axles and stuff
Attachments
20210403_183548.jpg
(170.95 KiB) Downloaded 571 times
20210403_155918.jpg
(295.54 KiB) Downloaded 576 times
20210403_155857.jpg
(324.85 KiB) Downloaded 574 times
20210403_155845.jpg
(297.04 KiB) Downloaded 582 times
Top
InterMechanico
Little Wheel
Posts: 85
Joined: Sun Oct 11, 2020 4:53 pm

Re: Sweet Darlin' 1953 80" Station Wagon

#17 Post by InterMechanico » Sat Apr 03, 2021 6:40 pm

I cannot overstate how much Silver Grade Never-seez will be used during reassembly.

As far as chassis protection goes, I'm going with Coal Tar Epoxy. Works great, even in salt water.
Top
InterMechanico
Little Wheel
Posts: 85
Joined: Sun Oct 11, 2020 4:53 pm

Re: Sweet Darlin' 1953 80" Station Wagon

#18 Post by InterMechanico » Sun Apr 04, 2021 7:37 pm

Cool to find an original Shelley LJ25 screw jack under the seat :D :D

I got it done; the easy part anyhow...

I can't believe how much of the hardware came out looking brand new, literally!
Attachments
1617590079481886870495390562699.jpg
(182.11 KiB) Downloaded 545 times
16175901002292086144985106681736.jpg
(200.45 KiB) Downloaded 538 times
1617590112394443796641750901320.jpg
(181.51 KiB) Downloaded 550 times
1617590132176468134966170488542.jpg
(156.1 KiB) Downloaded 535 times
16175901526448674336529113335576.jpg
(236.5 KiB) Downloaded 541 times
Top
InterMechanico
Little Wheel
Posts: 85
Joined: Sun Oct 11, 2020 4:53 pm

Re: Sweet Darlin' 1953 80" Station Wagon

#19 Post by InterMechanico » Sun Apr 04, 2021 7:39 pm

Spring Shackle hardware...
Attachments
16175902640207104814130303177683.jpg
(271.95 KiB) Downloaded 548 times
16175903155736615219557429399886.jpg
(238.09 KiB) Downloaded 560 times
Top
RobinS
Over Inflated
Posts: 177
Joined: Thu Oct 17, 2019 8:47 am
Location: Duncan B.C.

Re: Sweet Darlin' 1953 80" Station Wagon

#20 Post by RobinS » Mon Apr 05, 2021 6:49 am

A really nice " unmolested "series one Julian . A great project. I know the capstan winch is far from a priority at this time but there is a guy in the series one club who has cast new fair lead brackets identical to the originals if you can't find one to replace your broken one.
Top
Wilfpower
Newbie
Posts: 34
Joined: Tue Sep 10, 2019 5:11 pm
Location: Powell river

Re: Sweet Darlin' 1953 80" Station Wagon

#21 Post by Wilfpower » Mon Apr 05, 2021 7:27 am

Wow! Looking forward to following the transformation! Thanks for all the pictures!!!
Top
StuartL
Horn Blower
Posts: 573
Joined: Sun Mar 07, 2004 8:16 pm
Location: West Vancouver

Re: Sweet Darlin' 1953 80" Station Wagon

#22 Post by StuartL » Wed Apr 07, 2021 9:26 am

Looks like another BC Government truck as it has straps across the front wings. I am currently redoing a '52 80 that was used by BC Forest Services and will finish it in period BC Forest Services Livery. It is great so many people are interested in the early Series 1's again. Slow and steady just like they are.....the LRSOC is a great resource.
IMG_6291.JPG
(169.83 KiB) Downloaded 508 times
na-19871_141.jpg
(172.34 KiB) Downloaded 506 times
Last edited by StuartL on Thu Apr 08, 2021 8:24 am, edited 1 time in total.
Top
Turton
Little Wheel
Posts: 89
Joined: Fri Sep 18, 2015 8:50 pm
Location: Kelowna,BC

Re: Sweet Darlin' 1953 80" Station Wagon

#23 Post by Turton » Wed Apr 07, 2021 11:20 pm

Such a cool rover with great history. I will enjoy watching the restoration
Geoff
Top
webmaster
Half Shaft
Posts: 130
Joined: Mon Oct 21, 2019 2:20 pm

Re: Sweet Darlin' 1953 80" Station Wagon

#24 Post by webmaster » Thu Apr 08, 2021 1:10 pm

Reminds me of my '52 - 80" resto way back in 1996. Truck sat under a tree in the Okanagan from 1973 till I found her in 96. I poured some diesel down the cylinders and after letting it sit for a month, she started fine. Ran for several years before I rebuilt it.
pre_pass1a.jpg
(56.86 KiB) Downloaded 469 times
Enjoy your rebuild!
Top
InterMechanico
Little Wheel
Posts: 85
Joined: Sun Oct 11, 2020 4:53 pm

Re: Sweet Darlin' 1953 80" Station Wagon

#25 Post by InterMechanico » Mon May 24, 2021 6:24 am

Thank you for all the advice, guys.

A few pictures of the frame repairs in progress.
A far cry from the 2 days I thought it would take, but coming along nicely...

I bought a new welder which really helped move things along. I have a bunch of welders, but they're mostly geared toward heavy projects, and are a little clunky working with 2 mm plate.

The model I got (slightly used, purchased from a friend) is the Fronius TransSteel 2200C multi-purpose. It does steel and aluminum MIG very well, DC stick and DC scratch start TIG which I havent tried yet.
Attachments
20210523_183126.jpg
(228.83 KiB) Downloaded 386 times
20210523_183133.jpg
(298.92 KiB) Downloaded 381 times
20210523_183137.jpg
(234.92 KiB) Downloaded 371 times
20210523_183142.jpg
(225.2 KiB) Downloaded 373 times
20210524_062335.jpg
(219.41 KiB) Downloaded 377 times
Last edited by InterMechanico on Mon May 24, 2021 7:27 am, edited 2 times in total.
Top
Post Reply

Return to “Projects & Builds”