Where does this part go?

Message

Arcades · #1 Post by **Arcades** » Thu Feb 11, 2021 3:05 pm

So this part fell off my truck yesterday... Can anyone tell me where it belongs?

1CBA22D5-6E03-4E80-AC95-20B5FE323A70.jpeg: (501.98 KiB) Downloaded 672 times

bsa_m21 · #2 Post by **bsa_m21** » Thu Feb 11, 2021 5:15 pm

Why in my garage, of course! 🤗

HeadDamage · #3 Post by **HeadDamage** » Thu Feb 11, 2021 8:07 pm

You don't want that, it will not run worth a dam on diesel ;)

Arcades · #4 Post by **Arcades** » Thu Feb 11, 2021 9:57 pm

My thoughts exactly!

Arcades · #5 Post by **Arcades** » Thu Feb 11, 2021 10:03 pm

281D9313-CD75-42E5-B04A-AB2022557AA4.jpeg: (561.96 KiB) Downloaded 640 times

1E502518-15D8-46E2-BF22-C3E8602D22A5.jpeg: (527.83 KiB) Downloaded 641 times

Well now I don't have to worry about fuel at all anymore

Arcades · #6 Post by **Arcades** » Thu Feb 11, 2021 10:05 pm

CAFBCF69-3045-437F-BD96-17DDCD4733AE.jpeg: (451.69 KiB) Downloaded 650 times

But look at my lift now... To think all I needed to do was take out the brick.

ANDYD · #7 Post by **ANDYD** » Tue Feb 16, 2021 1:19 pm

Hey Mark,

Finally time for that Electric Conversion? Where will you put the 18 batteries? :wink:

Arcades · #8 Post by **Arcades** » Fri Feb 19, 2021 10:56 pm

I just want to pay back everything that I got from you guys.... mainly the diesel exhaust fumes!

acg · #9 Post by **acg** » Sat Feb 20, 2021 1:09 pm

Mark,

Are you planning on replacing with V8 with something else? Or simply re-building the existing engine?

Either ways, good luck with the project. Looking forward to seeing you at one of our runs when the weather gets warmer.

Arcades · #10 Post by **Arcades** » Sat Feb 20, 2021 1:29 pm

This is going in....

243AA93A-87F9-49BB-8701-52C7B0A1F669.jpeg: (453.07 KiB) Downloaded 568 times

8DAA3211-74FA-4FAF-A6D1-8731C049EACC.jpeg: (363.54 KiB) Downloaded 565 times

61139D75-5FA5-4114-AABB-1D1584160E4B.jpeg: (548.96 KiB) Downloaded 565 times

It's a om606 turbo, a 6l90e transmission and a Ashcroft special transfercase

Tony4921 · #11 Post by **Tony4921** » Sun Feb 21, 2021 7:45 am

Nice mod. Where did you get the sump for the 606?

Arcades · #12 Post by **Arcades** » Sun Feb 21, 2021 3:26 pm

I met this super nice guy online that had done this conversion more than once (they are the goto non OEM swap in Europe). I ended up shipping all my parts to his place and then he boxed them up and sent them here in a single shipment. Saved a ton of shipping. Also he had great advice.

Arcades · #13 Post by **Arcades** » Sun Feb 21, 2021 3:27 pm

It's from an om648

paulg_d130 · #14 Post by **paulg_d130** » Mon Feb 22, 2021 3:42 pm

keenly watching this so bring on the detail!
im toying with the idea of a om648 swap but still in the dreaming stage.

what did your get in your tcase? did you change the high range gears? add the ATB

Arcades · #15 Post by **Arcades** » Tue Feb 23, 2021 2:18 pm

It’s from Ashcroft. I HDed everything I could.. went to a higher gear set and the atb.

Arcades · #16 Post by **Arcades** » Tue Feb 23, 2021 2:26 pm

I figured that with all the torque from the new engine and the fact that I’m running 4.43 diffs I could use a higher gear.

Arcades · #17 Post by **Arcades** » Wed Feb 24, 2021 11:57 am

A2B7E2D3-F24A-4B90-81A0-CC1A69C0DDC7.jpeg: (553.93 KiB) Downloaded 490 times

In the hole!

bsa_m21 · #18 Post by **bsa_m21** » Wed Feb 24, 2021 6:55 pm

Mark - where are you doing, or getting the work done?

Arcades · #19 Post by **Arcades** » Thu Feb 25, 2021 11:11 am

It's being done at big country customs in Abbotsford. They also made my rear bumper for me amount many other things. They don't say no there.

Arcades · #20 Post by **Arcades** » Thu Mar 25, 2021 11:35 pm

Just a few shots of the progress... should be running in the next few days...

Arcades · #21 Post by **Arcades** » Thu Mar 25, 2021 11:45 pm

Intercooler pipes and exhaust

bsa_m21 · #22 Post by **bsa_m21** » Fri Mar 26, 2021 10:09 am

Sweet! Looking forward to seeing and hearing it. 👍👍

Arcades · #23 Post by **Arcades** » Sat Mar 27, 2021 4:04 pm

Me too... me too

Arcades · #24 Post by **Arcades** » Sat Apr 24, 2021 11:46 am

The engine is now running... I would post a video but it's too large 😢

Arcades · #25 Post by **Arcades** » Sat Apr 24, 2021 11:53 am

Had an issue with the linkage for my transfercase. I had too move it back because of the longer transmission. I didn't want to cut more holes in the floor and cut up my automatic console. I found the solution by following what the English guys are doing when they swap Cummins in... Often they put in larger transmissions including alisons! They go with a pneumatic system.. maybe an alternative for the disco guys who want to put CDL in....

The Rover-Landers of BC

The Rover-Landers of BC

Where does this part go?

Where does this part go?

Re: Where does this part go?

Re: Where does this part go?

Re: Where does this part go?

Re: Where does this part go?

Re: Where does this part go?

Re: Where does this part go?

Re: Where does this part go?

Re: Where does this part go?

Re: Where does this part go?

Re: Where does this part go?

Re: Where does this part go?

Re: Where does this part go?

Re: Where does this part go?

Re: Where does this part go?

Re: Where does this part go?

Re: Where does this part go?

Re: Where does this part go?

Re: Where does this part go?

Re: Where does this part go?

Re: Where does this part go?

Re: Where does this part go?

Re: Where does this part go?

Re: Where does this part go?

Re: Where does this part go?