Rebuilding A Weber

[DaveB]

Finding a carb kit might be your biggest challenge. I believe Rick Mellenger know where to find them.

You might also want to set the float level lower than instructions say so that you buy a little more angle before gas runs out of the float bowl vent and into the throat of the carb, causing flooding.

I found it could be set quite low without causing it to starve of fuel, and this especially made a difference when I was on a left side slope as the float bowl was on the right in my setup.

Dave

[Roverworks]

I have the kits in stock.
http://roverworks.com/
Alan

[ANDYD]

Here is a breakdown sheet on the Webber that some may find useful,

http://landroversonly.com/forums/attach ... mentid=388

http://landroversonly.com/forums/attach ... mentid=389

http://landroversonly.com/forums/attach ... mentid=390

http://landroversonly.com/forums/attach ... mentid=391

cheers,
Andy