Preparing to thin the horde

General Land Rover Discussion here. If you have something else non-Land Rover related to discuss, use the Off Topic forum
Message
Author
RamblerRob
Green Laner
Posts: 292
Joined: Wed Aug 20, 2014 9:03 pm

Preparing to thin the horde

#1 Post by RamblerRob » Sun Oct 09, 2016 7:44 pm

So if all goes well I should be purchasing a MUCH better base for my project. Given that my long suffering wife has requested and required that I make room for the new project in the garage.

To that end I'm hoping to get some feedback on fair prices to ask for some of my items.
This community has been amazing through and through so I'm not looking to wring every last dime out of this but hopefully recoup the lions share of what I've spent on this. My sense is that I overpayed on some of it and underpaid on others.
Here is what I have:

109 chassis in pretty sorry shape but comes with front and rear axles. Salisbury rear. Springs are pretty toast.

Couple of 109 rear tubs. Both in decent shape. One has a bit of corrosion on the bottom of the rear panels

Couple of 109 tropical roofs. Both in ok shape. Vent hinges are either very stiff or seized.

Seat boxes, one in decent shape. One not terrible shape.

A bunch of doors in poor to rough shape. Both front and middle.

Windshield frames. Two with the large demisters 1 with the small.

109 nada 6cyl bulkhead in pretty rough shape

Early 2a bulkhead in quite nice shape. Acid dipped and unpainted.

Tposts. one pair in rough shape, one pair refurbished but could use some cleaning up.

D1 axles and suspension linkage

3.9l v8. Was running apparently.. Not sure on milage.
(actually pretty much any D1 part except transmission transfer case and associated bolts, linkages and shifters.

Thanks for any info and feel free to let me know if you are interested in anything particular. I'll post a for sale thread once I've decided what exactly is no longer needed.
Mods feel free to move thus to the classified section if this is the wrong forum for it.

Rob