Series LandRover Parts for sale

[mepham55]

I’m cleaning up my shop and storage so it’s time to sell off some parts. I’ll try to get pictures of everything I list but you can always message me and I can send detailed pictures and provide more information on the part(s). All parts are located in Victoria BC. Thanks, Matt

Series Land Rover galvanized, dual action tailgate hinges, allows you to use the tailgate as normal or as a swing away door. $275

IMG_1250.jpeg

(153.23 KiB) Downloaded 353 times

Series Land Rover full vehicle polybush set Britpart number DC7003. $100

IMG_1642.jpeg

(245.92 KiB) Downloaded 300 times

IMG_1643.jpeg

(222.79 KiB) Downloaded 288 times

SOLD*Side fill fuel tank. Heavy, original tank. Needs cleaning up but it is not rusty. SOLD*$275

IMG_1649.jpeg

(305.6 KiB) Downloaded 340 times

IMG_1650.jpeg

(111.06 KiB) Downloaded 340 times

Series under seat fuel tank. I had this fitted to my series one truck but it will fit on the left side of all series trucks. Heavy, original tank that had been lined with POR15 fuel tank sealant. $250

Lots of seat boxes, wings, tailgates, seats and smaller panels. Let me know what you’re looking for and I can send pictures.

Matt

[Canadman]

Hey Matt,

Quick question. Saw your items for sale. I'm still finishing up the build of my 67'ish S2A 88. Im currently looking for seat boxes for the front seats and a half tailgate (i want to go with a soft top at the back and only have the full back door right now. Also looking for the strike receiver (or whatever its called) for the right side door handle, one windshield mounted wiper motor (i have the other one, but the second one is toast), hoses for the dash heating, and two mesh screens for the flip up above dash vents.

Any chance you have any of this and if so, what would yoi want for them. I'm in the Okanagan but can sort something out re pick up.

All the best.

Adam Less

[mepham55]

Hi Adam, I have most of that stuff for sure. The only thing I’m not sure about is the wiper motor but I will check. For the dash vent screens do you have some of them or do you need a complete set? There are 4 pieces total.
Also, what heater do you have? That will determine what size hoses you will need.

Matt

[bfein1075]

Got any 86/107 wings?


Sent from my iPhone using Tapatalk

[Canadman]

Hi Adam, I have most of that stuff for sure. The only thing I’m not sure about is the wiper motor but I will check. For the dash vent screens do you have some of them or do you need a complete set? There are 4 pieces total.
Also, what heater do you have? That will determine what size hoses you will need.

Matt

Hey Matt, I need the full sets for the screens ideally. Re the heater it's a Kodiak.

[mepham55]

Got any 86/107 wings?


Sent from my iPhone using Tapatalk

Sorry, no Series one wings available

[Canadman]

Hi Adam, I have most of that stuff for sure. The only thing I’m not sure about is the wiper motor but I will check. For the dash vent screens do you have some of them or do you need a complete set? There are 4 pieces total.
Also, what heater do you have? That will determine what size hoses you will need.

Matt

PM'd you Matt

[mepham55]

A few more parts.

Metal snorkel, raised air intake top. $40

IMG_1664.jpeg

(135.42 KiB) Downloaded 272 times

7” Chrome headlight guards, flip open for easy cleaning! $25/pair

IMG_1667.jpeg

(377.08 KiB) Downloaded 287 times

[mepham55]

More stuff! I have a couple used front bumpers for series 2 and 3 trucks here. Both have some random holes in them. The Galvanized bumper is in decent shape and will clean up nicely, $75. The one painted black with the military over riders fitted is very heavy! It’s been chopped up unfortunately for a winch I presume. $50 SOLD

[Dijan1993]

Hello, what are the chances you have 5" sills (full set LHS/RHS) for a 109 four door station wagon?

[bsa_m21]

Hey Matt. I’m looking for a set of folding side steps for the driver/passenger doors. Got anything?

[mepham55]

Hello, what are the chances you have 5" sills (full set LHS/RHS) for a 109 four door station wagon?

I think I do. I will try and get out to my storage next week and let you know.

Matt

[mepham55]

Hey Matt. I’m looking for a set of folding side steps for the driver/passenger doors. Got anything?

Hi Martin,

I do have some steps. They are rusty but salvageable. I’ll get some pictures for you next week.

Matt

[Dijan1993]

Thanks Matt. I will wait for your reply sir.

[bsa_m21]

Thanks Matt. I’ll take them, whatever the condition. FYI - I’ll be out at Mayne Is over the holidays and might be able to pop over to Victoria to get them. Will let you know if the wife will let me go…… :lol:

[Canadman]

Hey Matt,

I've emailed you back a couple of times but haven't heard back. Not sure if my emails are making it back to you. If not, I'd like to buy the seat base(s). I assume I need 3, right, left and centre. Also the windshield splined connectors/nuts. Let me know (email or pm).

[robert m]

Hey Matt, I’ll also take those dual action hinges if you still have them plus the headlight guards.

[Speedbird]

Hi , im in the middle of a 2a restoration and need plenty of parts. I'm in nanaimo. Pls contact me 778 996 6936 austen

[thegoose]

i'll take the poly bush