GONE TO DOOR HEAVEN: Defender 110 Front and 2nd Row Doors

[withabix]

OK…would anyone be interested in my old doors?

All door skins have rivet holes (where the dirty patches are) from chequerplate 'armour' that was previously attached. Skins aren’t bad, but have some bottom corner damage.

https://share.icloud.com/photos/06aiZpT ... 3GLx_Rtnfw

FRONT ROW DOORS ARE REFURBISHABLE - WHAT ARE THEY WORTH TO YOU?

Front right door is in reasonable condition as it appears to have had repair sections welded in before my ownership. Re-usable with minimal work (could go straight on with minor work to bottom corner of door skin)

Front left door needs bottom corner repair section (may have previously had the bottom channel replaced) and some attention under the window to prevent further rusting (that part is available from YRM I think), but again could probably go straight on a Defender.

SECOND ROW DOORS ARE FREE - SUITABLE ONLY FOR SALVAGING SKINS OR METAL FROM

Both second row doors are suitable for parts only - eg the door skins and parts of the frame for cutting out and re-use - I'm not sure if YRM or any of the fabricators make the lock mounting part of the door, so these doors are not going to be suitable for refurbishing unless you're an expert fabricator!

Look at the photos in the link…

Doors are bare with only what hardware you can see in the photos.

Available to view in Maple Ridge, and collection only!

IMG_0468.JPEG

(200.62 KiB) Downloaded 188 times

[withabix]

End of year Bump!

Coming to a Facebook Marketplace near you...