Koenig PTO driven winch

Message
Author
davran

Koenig PTO driven winch

#1 Post by davran » Tue Apr 14, 2015 8:36 pm

With the pile of stuff that came with the 88 I recently received, I found -- I think -- all the bits of a Koenig PTO driven capstan winch -- exactly like in the following page:

http://www.pangolin4x4.com/reference/re ... y/winches/

Here are some pics of the one in my garage:

http://i1186.photobucket.com/albums/z363/davran714/Koenig%20PTO%20winch/Koenig-winch-001.jpg

http://i1186.photobucket.com/albums/z363/davran714/Koenig%20PTO%20winch/Koenig-winch-002.jpg

http://i1186.photobucket.com/albums/z363/davran714/Koenig%20PTO%20winch/Koenig-winch-003.jpg

Anyone have any experience with this kind?

Thanks,
Last edited by davran on Sun May 03, 2015 3:03 pm, edited 2 times in total.

HeadDamage
Horn Blower
Posts: 574
Joined: Thu Mar 18, 2004 3:21 pm
Location: Calgary

Re: Koenig PTO driven capstan winch

#2 Post by HeadDamage » Tue Apr 14, 2015 10:25 pm

That is a drum winch not a capstan.

Greg S
Spanner Man
Posts: 844
Joined: Sat Feb 28, 2004 9:00 pm
Location: Duncan
Contact:

Re: Koenig PTO driven capstan winch

#3 Post by Greg S » Tue Apr 14, 2015 11:28 pm

Those Koenig PTO driven drum winches are the best of the best.

Good catch!

Only one draw-back; you cant have a overdrive as well. Too bad- mount the winch.

I have one on my 109 and have used it quite a bit. It pulls very well and exceeds the advertised 8000# load. Try that with an electric winch. It won't happen! It will also pull all day and not tire. Try that with an electric winch. It won't happen! It will hold over 150' of cable, a lot over 150'. Try that with an electric winch ... It's quiet. Try that ... It goes fast when you want to wind it in. ... It goes slow when you want it to and you can adjust the line speed. ...

davran

Re: Koenig PTO driven capstan winch

#4 Post by davran » Wed Apr 15, 2015 10:48 am

Excellent, thanks. My plan was taller tires, not an overdrive, so it works out :)

mepham55
Spanner Man
Posts: 835
Joined: Fri Mar 26, 2004 8:38 pm
Location: Victoria, BC, Canada

Re: Koenig PTO driven capstan winch

#5 Post by mepham55 » Wed Apr 15, 2015 7:29 pm

I have restored one of these winches recently. If you need any help let me know. I have most of the oil seals, u joints and bearing part numbers.

Matt

rayhyland
Drip Dry
Posts: 652
Joined: Mon Feb 23, 2009 5:28 pm

Re: Koenig PTO driven capstan winch

#6 Post by rayhyland » Thu Apr 30, 2015 10:36 pm

We explored Malaysia with a friend who had one of these on a series 3, it ran all day with no complaint. Really an awesome winch.

Post Reply