Snorkle Precleaner

Message
Author
e.prevost94

Snorkle Precleaner

#1 Post by e.prevost94 » Wed Apr 10, 2013 9:56 pm

I am wanting to get going on making my snorkel, but I've hit a bit of a roadblock. I want to use a oil bath style prefilter, however, I can't really find any info on the web. I don't really want to go down the road of the Aussie style inlet, as I am pretty much convinced that I would be better off througing a bag of sand down my intake. I did see some of the prefilters that are readily available, however I'd rather stick to something I know works very well. Does anybody have any suggestions where I may be able to find a housing that would be suitable?

Greg S
Spanner Man
Posts: 844
Joined: Sat Feb 28, 2004 9:00 pm
Location: Duncan
Contact:

Re: Snorkle Precleaner

#2 Post by Greg S » Wed Apr 10, 2013 11:37 pm

Any tractor shop will have them. They're generic for farm and industrial engines. Last one I bought, 20 years ago, was about $80 way back then.

LandyAndy
Maxi Drive
Posts: 319
Joined: Tue Nov 30, 2004 2:54 pm
Location: Revelstoke

Re: Snorkle Precleaner

#3 Post by LandyAndy » Thu Apr 11, 2013 7:32 am

I have a Donaldson pre-filter on my D2, works great even on fluffy white snow..... then it melts & you have to empty the water out of it every so often :wink:

red90
Defender of the World
Posts: 1509
Joined: Mon Mar 08, 2004 7:19 pm
Location: Calgary

Re: Snorkle Precleaner

#4 Post by red90 » Thu Apr 11, 2013 7:48 am

Most of the newer ones do not hold the dirt and do not need cleaning, but the Donaldson bowl type is still the cheapest.

The important bit is to get one that is well sized to the engine. You need to provide engine size, maximum engine speed and boost pressure to the vendor and they can figure out the right size. They will restrict the flow and only work well in a limited flow range.

Here is one place with a variety: http://store.airflo.com/precleaners---parts.html

A lot of the Rover stock air boxes have precleaners built into them as well.

e.prevost94

Re: Snorkle Precleaner

#5 Post by e.prevost94 » Mon Apr 15, 2013 8:55 am

Thanks for all of the responses. What one seems to be the best one for removing dust? I'd rather spend a little extra money to get a good one, rather than cheap out and get a piece of crap.

red90
Defender of the World
Posts: 1509
Joined: Mon Mar 08, 2004 7:19 pm
Location: Calgary

Re: Snorkle Precleaner

#6 Post by red90 » Mon Apr 15, 2013 9:56 am

I doubt you will find test data, so there would be no way to know. With centrifugal dust removal, it is all about having it sized correctly for the flow. More pressure drop gives better particle removal but hurts performance of the engine. The air filter removes the important stuff These just help improve filter life if you drive in dusty conditions a lot.

Post Reply