Page 1 of 1
Waxoyl Disco Chassis
Posted: Sun Oct 11, 2015 11:19 am
by acg
I am thinking of Waxoly'ing my chassis. Does anyone know of shops which provide such services? Thanks!
Re: Waxoyl Disco Chassis
Posted: Mon Oct 12, 2015 4:19 pm
by Crs
Hi Andrew,
I think I remember Trevor trying out a Waxoyl sprayer at Rovalution on one of my many trips there this summer.
Probably any of our sponsors will be able to steer you in the right direction.
:D
Re: Waxoyl Disco Chassis
Posted: Mon Oct 12, 2015 9:40 pm
by acg
Thanks Craig! I'll call Rovalution.
Re: Waxoyl Disco Chassis
Posted: Wed Oct 14, 2015 12:39 pm
by John
You may also want to investigate Krown or RustCheck.
John
Re: Waxoyl Disco Chassis
Posted: Wed Oct 14, 2015 9:14 pm
by acg
John,
Thanks for the info. Both franchises look to be very good and inexpensive options. I will check them out.
Re: Waxoyl Disco Chassis
Posted: Tue Nov 10, 2015 4:33 pm
by acg
I called a number of the Krown and Rustcheck dealers. They only sell the products but doe not offer spraying services. I may just go and do it myself.
Anyone interested in doing this with me? Or perhaps make this as a club winter event. I have a contact who owns a fab shop in Abbotsford and I can rent his shop for a few hours or 1/2 day. He has compressor equipment, fab equipment, lift and tools.
Re: Waxoyl Disco Chassis
Posted: Wed Nov 11, 2015 1:01 am
by Dave_F
Don at Rovalution just did a Defender and it looks fantastic.
Not inexpensive, but if you value your chassis..then really a wise investment.
Re: Waxoyl Disco Chassis
Posted: Wed Nov 11, 2015 8:18 pm
by BlkP38
acg wrote:I called a number of the Krown and Rustcheck dealers. They only sell the products but doe not offer spraying services. I may just go and do it myself.
Anyone interested in doing this with me? Or perhaps make this as a club winter event. I have a contact who owns a fab shop in Abbotsford and I can rent his shop for a few hours or 1/2 day. He has compressor equipment, fab equipment, lift and tools.
Andrew,
I was thinking about this a few days ago. Don't know why as I have a galv chassis (but maybe the next project). Anyway, Ottawa Valley Land Rover have an annual event which is a great together and they all get stuck into their chassis. They suggest jacking up one end of the car a while before and give the chassis a good flush.
Re: Waxoyl Disco Chassis
Posted: Wed Nov 11, 2015 8:58 pm
by StuartL
From all accounts by knowledgeable Land Rover owners Krown is the place to go.
Re: Waxoyl Disco Chassis
Posted: Wed Nov 25, 2015 7:38 am
by CDN38
The rust /corrosion service Rovalution is doing is a product called Dinitrol.
After looking at the Krown site, and process, I would say the Dinitrol is about 1000% more comprehensive. The Krown has to be re-applied every year.