Page 1 of 1
Engine rebuilders for a S1 '55 2L
Posted: Thu Oct 06, 2011 8:08 am
by LandyAndy
The '55 2L donor engine for my S1 is going to need either a rebore or a liner fitting as #1 cyl was full of water when I pulled the head off. Any recomendations for a good machine shop that's worked on these old spread bore engines before ?
Anyone have any spare engine parts..... pistons.... NOS bearings ?
Cheers,
Andy
Posted: Thu Oct 06, 2011 1:52 pm
by swamijake
Posted: Thu Oct 06, 2011 3:33 pm
by LandyAndy
Thanks for the heads up but until we get the old one out and the bore worked on I won't know what we'll need. It'll either get sleeved & bored back to std or be over sized.
Hopefully back to std & we can reuse the old piston... fingers crossed :wink:
Posted: Mon Oct 10, 2011 10:01 am
by LandyAndy
Any good leads on an engine rebuilding shop ?
Posted: Mon Oct 10, 2011 3:43 pm
by mange rover
i have a few parts block and polished crank and there may be more these are from a 59.2a