Posted: Mon Jan 24, 2005 6:47 pm
Finding a carb kit might be your biggest challenge. I believe Rick Mellenger know where to find them.
You might also want to set the float level lower than instructions say so that you buy a little more angle before gas runs out of the float bowl vent and into the throat of the carb, causing flooding.
I found it could be set quite low without causing it to starve of fuel, and this especially made a difference when I was on a left side slope as the float bowl was on the right in my setup.
Dave
You might also want to set the float level lower than instructions say so that you buy a little more angle before gas runs out of the float bowl vent and into the throat of the carb, causing flooding.
I found it could be set quite low without causing it to starve of fuel, and this especially made a difference when I was on a left side slope as the float bowl was on the right in my setup.
Dave