Page 1 of 1
For sale, early mustang v8 engine was installed in a safari has bell housing adaptor plate for S1, 2, or 3 gearbox eng.
Posted: Tue Sep 26, 2023 11:02 am
by Quesnel44
For sale 70's mustang engine runs but needs O/H probly.
Adaptor bell housing for series 1, 2, or 3 gearbox, was installed in a safari, lve message 2502495358
Re: For sale, early mustang v8 engine was installed in a safari has bell housing adaptor plate for S1, 2, or 3 gearbox
Posted: Tue Sep 26, 2023 1:46 pm
by ryancr500
Did the motor use the existing motor mount locations?
Re: For sale, early mustang v8 engine was installed in a safari has bell housing adaptor plate for S1, 2, or 3 gearbox
Posted: Wed Sep 27, 2023 8:27 am
by jacobko
This looks like it would only work for a series 2 (non-2.0L) and 2a gearbox. The series 1 has a different bolt pattern on the bellhousing. and the series 3 slave cylinder would interfere with the v8 engine block.
Re: For sale, early mustang v8 engine was installed in a safari has bell housing adaptor plate for S1, 2, or 3 gearbox
Posted: Thu Sep 28, 2023 9:39 pm
by gooffer
kiss your gearbox goodbye with this setup. Not even going to talk about half shafts...