Page 1 of 1

Series 1 86" & 107" parts

Posted: Sun Mar 12, 2023 6:08 pm
by VintageSpice
Well I too have sold all my Land Rovers but still seem to have a lot of stuff!
All of this was kept as spares for vehicles that i owned & drove.
I've put guess-timates on prices.. Some i'm fairly firm on, most I'm very flexible.
I'm located near Crescent Park in South Surrey.

You can contact me at: [email protected]

I've included 5 photos. I tried more but I think my file size is too big.
If you email I can send more pictures.

Two 2 liter engines - were "runners" before storing $300 each.
Went out and got serial # this afternoon.
#57136517 1955? & #11470883 1957?

2 transmissions both have low range & shifter bits attached.; $100 each
complete plus box of miscellaneous gears n bits for a 3rd.

Pair of front swivel hubs $100 each
Pair of rear axles $25 each
Brake drums 4 10" $75.00
Bumper 86/107 good $75
Rear station wagon jump seats 1 for 86" 1 for 88" $50 each

Pair of rare L & R Canadian one piece front doors. complete with hardware. 86 & 107. $200
I would guess that a lot of owners (and maybe dealers) in Canada were welding the door tops to the bottoms and a suggestion was made to LR headquarters, then test marketed on North America. It cost extra and therefore didn't sell well enough to add to the home market lineup of home market options.

One drivers side "normal" series 86/107 door complete $50
New exhaust pipe for 107 station wagon. $150
Used front exhaust pipe for 86" two of them $25
Rear station wagon door. Top & bottom See photos above I think it is for an 86" $125
My spare 86/107 radiator $200
One large oil bath air cleaner $75
Steering box and column 86/107 $100


Plus lots of miscellaneous brackets/shift handles/ pedals/ brackets/ etc


3 or 4 Rubbermaid containers of all the nuts, bolts & brackets & pieces that were removed or replaced during restorations.
All correct for your restoration. Most in ziploc bags from each "job." A free bag or 2 with every purchase!

Re: Series 1 86" & 107" parts

Posted: Sun Mar 12, 2023 10:09 pm
by InterMechanico
Hi Gary. Can you set the 80" wiring harness and bumper aside for me? PM or email me for an e-transfer! [email protected]

Re: Series 1 86" & 107" parts

Posted: Sun Mar 12, 2023 10:24 pm
by Trygve
Emailed you earlier about engines and other bits.

Thanks
Trygve