The Rover-Landers of BC

I’ve got lots of series stuff I’d like to move on. Some for sale, some stuffs free:

Set of SELECTRO free wheel hubs, 10 spline - $100

Rear safari door; glass frame solid - $50 (SOLD)

5 - 16” SWB rims with old bias plys (free)

Regular 88” hardtop, excellent condition, no dents, it’s been stripped ready for paint and new glass seals. ($100)

Front floor panels (free)

Bumper; flaking black paint with galvanized showing underneath ($20)

Propshaft- various models, ask

Good Rear tub supports - $20

Clean Galvy side sills - connect bulkhead to rear tub $15

Various hubs and brake back plates - let me know what you need.

Steering boxes - series 2a will work with plastic steering wheels ($50 needs cleaning and rebuild, $150 Works smoothly might need new seals and gaskets)

Battery air cleaner supports - $25

Lots of various Lucas lights - let me know what your looking for.

Hand Brake levers - early style and later, long handle style $15

Galvy Fuel filler surrounds and fill tubes - $25

Front door hinge sets - $75 both doors

Door latches - various styles

Tailgate hardware - let me know what you need

Good used tailgate - $250(SOLD)

Good front fenders for early trucks(no headlights) came off a white 109” - $200(SOLD)

NEW folding Series side steps - $250/pr (SOLD)

Completely Rebuilt “E” suffix gearbox includes transfer case and front output housing - $1000

Good working Fairey Overdrive - (SOLD)$750 will include a New seal kit with sale

Windscreens - good Galvy - $25 one that need re galvanizing take them for free.

Winches:

2 Warn 5687 (the 8274’s grandfather) one is complete with new bearings, motor works fine and has all the original cables. $375 for all. (SOLD)

Braden pto winch, model MU3-10F - not designed for land rovers but can be made to work. Was fitted to my 107” but it’s too big for that truck. Came off a military Dodge I believe $150



Matt

Hey Matt - if no one on the island wants it, I'll take the hard top. Was thinking of coming over in Dec with the wife for a weekend getaway. Would get it then if no one else has taken it.

Martin

bsa_m21 wrote: Wed Oct 28, 2020 1:32 pm Hey Matt - if no one on the island wants it, I'll take the hard top. Was thinking of coming over in Dec with the wife for a weekend getaway. Would get it then if no one else has taken it.

Martin

Sounds good Martin, just keep in touch.

I would like the tailgate and windscreen, might as well add the better steering box too. Is the windscreen for the earlier models with the wiper motors going through the frame or the later model? I’m looking for the later model.
Thanks Geoff

Do you have picture of the fenders too
Geoff

Turton wrote: Wed Oct 28, 2020 7:31 pm Do you have picture of the fenders too
Geoff

I’ll get some pictures of the fenders. And I have both early and later style windscreens.

Matt

And pics of the winch also, please. 🤗

Hey Matt.

I'd like the door sills if they aren't spoken for.

Thank you!

Julian

Turton wrote: Wed Oct 28, 2020 7:31 pm Do you have picture of the fenders too
Geoff

Pictures sent

Matt

InterMechanico wrote: Wed Oct 28, 2020 11:23 pm Hey Matt.

I'd like the door sills if they aren't spoken for.

Thank you!

Julian

Sounds good. I have a few sets of the sills.

Matt

Hi Matt,
I'd like to take the safari door if still available. Thanks
Ian (IG: @landy757)

Hi, by chance do you have a turn signal wand for a series 11A late 1969

Thank you

Also looking for the front centre seat pads
Thanks again

Hi Matt,
Do you still have some Series parts available?
Thanks,
Lorne

LorneC wrote: Thu Dec 03, 2020 7:26 pm Hi Matt,
Do you still have some Series parts available?
Thanks,
Lorne

Yes, let me know what your looking for.

Matt

Hi Matt - sent you some PMs.Not sure if you got them or if this system is a bit wonk.

Looking for a wiring harness ( early 2a modified to neg ground). Also interested in those 15 inch rims. Will pick up once we get this travel restriction sorted.
Phil.

Seems like a few of us are on the mainland. Once the travel restrictions are eased, I will volunteer to head over and pick everything up for Martin and Phil and anyone else. Just buy me a six pack?

Have F150, will haul...

Matt. I need a set of tailgate fold down, hooks and chains, and bracketry. Doesn’t matter what style. Pm or email me with whatever you have available.

Thx

M

Hi Matt,
I am looking for a Series 3 brake tower.

Thanks,
Lorne

wondering about the steering box. i have a long shaft wheel for a power steering setup. don't know what year. trying to make it all work.

I am interested in a tire and rim and the overdrive. Where abouts are you located.

David Jensen wrote: Sun Jan 03, 2021 9:46 pm I am interested in a tire and rim and the overdrive. Where abouts are you located.

I’m in Victoria

Matt

LorneC wrote: Sat Jan 02, 2021 5:59 pm Hi Matt,
I am looking for a Series 3 brake tower.

Thanks,
Lorne

Sorry, I don’t have any series 3 brake towers left.

Matt

Hi Matt I will take the fairly o d Not very good with this text stuff so if I am slow to respond it’s not for lack of trying

Hello Matt, interested in the front door hinge set. Are they the early rebuildable types? Cheers. Ryan