The Rover-Landers of BC

Various series 1/86” body panels and bits, as well as other parts. Either cheap or free. Pickup is in Squamish.

-S1 door bottoms good/fair. 2 pairs. Free.
-S1 door tops. No glass. Fair. Free.
-S1 bonnet with tire mount plate. Good. Free. Going to scrap soon.
-S1 roof and sides. Glass intact. Fair/poor. Dent in roof. Free. Going to scrap soon.
-S2 wide sill panels 109”. Good. $20
-S2 seats and base brackets. Poor but frames and hardware all there. Free.
-S2 misc tunnel and firewall vinyl trim. Black. Rough shape. Free.
S2/3 rear tailgate upper clamshell. Good, complete except handle. $40
-S1 windscreens Fair. Free. Going to scrap soon.
-Round headlight rock screens. Good. $10
-S1 floor and seat box panels, tunnel cover. Fair. $20
-S1 rear tub. Poorish. Sides fair, interior box poor. Free. Going to scrap soon.
-Milk crate with various rover hubs/stub axles. Free. Going to Scrap soon.
-

Some of the free stuff will be going to scrap or dump shortly. Priced items need to go as well so offers or trades in S1 bits welcome. Local pickup preferred.

Seats

Bits and pieces

More bits

Hi Devin, I'll take your seat rails / brackets!

If I was on the mainland I’d take the hardura panels, and a series one tailgate! Also, if you have a 107” SW I’d take that as well 😜

Can I ask if you would be prepared to ship any of the door bottoms please. I’d have a set but live out of province and we are told to not travel.

I hate to see bits go to scrap. If you need to get rid of stuff I will take it and hold it for the next person.

Ray


Sent from my iPhone using Tapatalk

Hi Devin,

I would love a pair of door bottom for my 80" do you have them in your collection?

Cheers,

rayhyland wrote: Mon May 25, 2020 10:27 pm I hate to see bits go to scrap. If you need to get rid of stuff I will take it and hold it for the next person.

Ray


Sent from my iPhone using Tapatalk

Ray if you connect with Devin, I would be interested in the hardura trim bits and a series one windscreen frame. Hopefully we can have a meet up run in the near future and I could grab those bits off you.

Matt

rayhyland wrote: Mon May 25, 2020 10:27 pm I hate to see bits go to scrap. If you need to get rid of stuff I will take it and hold it for the next person.

Ray


Sent from my iPhone using Tapatalk

Hello Ray,
Like Matt said if you could get hold of those parts, I’d certainly be keen for a set of S1 doors please (top and bottom), thank you.

Ian

I’d like the headlamp guards, but have got zero response.

No plans to travel to Squamish, so hoped he’d ship them.

If you manage to get them I’d still like them.

Kevin

Hi all,

Building permits came through for a major house and garage Reno; I had to move things very quickly, and haven't been able to login for a bit. (Before your kind offer, Ray). Most of the large panels have gone, although I feel everything that went was quite rough in terms of panel damage. I still have most of the smaller bits. Shipping may be possible, but very expensive for the larger parts when I looked into it, and my strong preference is local pickup. I will try to get back individually with those who have expressed interest.