Page 1 of 1
Disco 1 going to scrap very soon
Posted: Wed Jan 16, 2019 11:29 am
by RamblerRob
I have a '95 d1 sending to scrap very soon. (days)
If you need anything let me know.
Seats are gone. Various bits and pieces are gone but mostly still intact
Located in Courtenay.
Re: Disco 1 going to scrap very soon
Posted: Thu Jan 17, 2019 8:07 am
by bsa_m21
Sigh. So many bits I likely could use. Too bad it's an expensive ferry ride (two actually) and many hours away from the mainland. Hopefully someone on the island will prevent the bits from going to waste.
M.
Re: Disco 1 going to scrap very soon
Posted: Thu Jan 17, 2019 8:44 am
by rayhyland
Automatic or manual?
Sent from my iPhone using Tapatalk
Re: Disco 1 going to scrap very soon
Posted: Thu Jan 17, 2019 4:53 pm
by RamblerRob
Auto. I'm keeping the shifter and linkage.
Re: Disco 1 going to scrap very soon
Posted: Thu Jan 17, 2019 4:55 pm
by RamblerRob
Yeah it's killing me too but we are moving and I'm out of time :(
bsa_m21 wrote: Thu Jan 17, 2019 8:07 am
Sigh. So many bits I likely could use. Too bad it's an expensive ferry ride (two actually) and many hours away from the mainland. Hopefully someone on the island will prevent the bits from going to waste.
M.
Re: Disco 1 going to scrap very soon
Posted: Fri Jan 18, 2019 1:10 pm
by donno
Would it be worth grabbing the distributer/coil etc, fuel pump and maybe the ecu? Oh and the TPS? Ship it over to Sechelt? Just thinking of parts I could need down the road!
Don
Re: Disco 1 going to scrap very soon
Posted: Mon Jan 21, 2019 9:52 pm
by RamblerRob
Sorry been a busy few days.... Will get back to any missed PM's later in the week.
As far as pulling and shipping bits it might boil down to time or lack of it... Will see what I can do
Re: Disco 1 going to scrap very soon
Posted: Mon Jan 28, 2019 5:06 pm
by D2Islander
Did it go to the scrap yard yet? Would like the front windshield wiper's if you still have them!
Re: Disco 1 going to scrap very soon
Posted: Mon Jan 28, 2019 7:36 pm
by RamblerRob
It hasn't gone yet. It's pick up only at this point. I'm seriously out of free time so can't guarantee I'll be able to pull and ship anything.
Re: Disco 1 going to scrap very soon
Posted: Wed Feb 13, 2019 12:39 pm
by donno
Any update on this, still have it? Thinking I could maybe pop over from the sunshine Coast on the weekend and grab some parts if still available. Specifically need an ecm at the moment.
Cheers,
Don
Re: Disco 1 going to scrap very soon
Posted: Fri Feb 22, 2019 6:15 pm
by RamblerRob
Gone!