Hi all, I am putting the wings back together on my 110, and would like to know if I need to put any kind of stripping or whatever else where the wing parts are bolted together.
Is body tape related to this?
Thanks for all your help. Dan.
De Fenders
-
Bill E.
- Landy Man
- Posts: 933
- Joined: Wed Mar 03, 2004 12:30 pm
- Location: Tsawwassen BC
Hi Dan,
The factory doesn't put anything at any of the joints in the wings. I haven't noticed any corrosion at the interface between the wing and the steel bulkhead but I suppose if there are going to be problems this is where they would appear first. Perhaps an insulating strip in this joint could be useful. I wouldn't bother with any of the other joints. IMHO
:spinning:
The factory doesn't put anything at any of the joints in the wings. I haven't noticed any corrosion at the interface between the wing and the steel bulkhead but I suppose if there are going to be problems this is where they would appear first. Perhaps an insulating strip in this joint could be useful. I wouldn't bother with any of the other joints. IMHO
:spinning:
-
JD