SOLD - ICBC registered 86" Suzuki/Tracker/Series 1 project $400

[rayhyland]

OK, this is a true basket case.

A few years ago we bought a running 1991 Suzuki/Geo Tracker. It has an 86 inch wheelbase.
It ran well, but the frame was rusted through in a couple of spots.

The plan was to cut the body off, reinforce the frame, and drop on an 86" Series 1 body. This would give us a Series 1 with coil springs, modern brakes, and parts available at Lordco.

Well of course life got in the way: we cut the body off and then got distracted, and it has been sitting under a plum tree in my driveway collecting moss and plums ever since. Ran when parked :lol: but who knows how much effort it would take to get it running today. It may just need some clean fuel and a new battery, or it may need a bit more effort. The air inlet was covered when we pulled the body off, and it's had a tarp over the engine. It's got the usual Suzuki 1600 engine with the manual 5 speed gearbox.

It is fully registered. You could put plates on it today. Someone can turn this into a buggy, or if you have another Suzuki that is lacking registration, that could be helpful, or if you want to turn it into a Series 1, I have a couple spare Series 1s and Series 1 body parts in my yard, but that would be an additional cost.

Someone please take this away, my wife is no longer amused.

Ray
604 889 2169
[email protected]

https://i.imgur.com/q3qUpDz.jpeg

https://i.imgur.com/6qwUxSR.jpeg

[rayhyland]

Oh, I forgot to mention, it's at my house in Chilliwack. I will give it a day or two here and then I will put it onto 4WDABC

cheers

Ray

[rayhyland]

This is gone, but it turns out the series that went with it was an 80", not an 86".
Apparently I need to pay better attention to the trucks in my yard.
:-)