Series II/IIA body panels
Forum rules
Private Sales Only. Vendors/Dealers, pls use Vendors section. Sellers - pls mark post "SOLD" when your items sell.
By posting in this forum, you agree not to post anything abusive, obscene, vulgar, slanderous, hateful or threatening, Doing so may lead to you being immediately and permanently banned.
Private Sales Only. Vendors/Dealers, pls use Vendors section. Sellers - pls mark post "SOLD" when your items sell.
By posting in this forum, you agree not to post anything abusive, obscene, vulgar, slanderous, hateful or threatening, Doing so may lead to you being immediately and permanently banned.
-
Troll Hunter
- Newbie
- Posts: 39
- Joined: Wed Sep 28, 2016 4:14 pm
- Location: Kaslo BC
Series II/IIA body panels
I have both upper sides for a Series II/IIA. They are not perfect, but can certainly be used, complete with all glass. I don't know what model they came off, but they are ~53" long. I also have the top half of the left door, with all glass, and one spare rear glass for a side door. Located in Kaslo, BC.
Mike
Mike
-
RamblerRob
- Green Laner
- Posts: 292
- Joined: Wed Aug 20, 2014 9:03 pm
Re: Series II/IIA body panels
Is this the rear window and corner piece that sit between the tub and roof?
If so, and they are station wagon sides, i may be interested.
If so, and they are station wagon sides, i may be interested.
-
Troll Hunter
- Newbie
- Posts: 39
- Joined: Wed Sep 28, 2016 4:14 pm
- Location: Kaslo BC
Re: Series II/IIA body panels
As I said, although perhaps not clearly, the door side I have is the upper section of the left door. Again, as I said, I also have the rectangular (rear) glass section for a side door. It appears to be unisex, ie fits either side. It us not the rear window and corner piece that sit between the tub and roof.
Regarding the two sides, as I said, I don't know what model they came off, but they are approx 53" long. If that's what you want, then they are here. I don't know what vehicle they came from because I acquired them by saving them from going to the dump! These bits are irreplaceable, and needed to be saved! I'm not interested in keeping them because I have a 110.
Mike
Regarding the two sides, as I said, I don't know what model they came off, but they are approx 53" long. If that's what you want, then they are here. I don't know what vehicle they came from because I acquired them by saving them from going to the dump! These bits are irreplaceable, and needed to be saved! I'm not interested in keeping them because I have a 110.
Mike
-
RamblerRob
- Green Laner
- Posts: 292
- Joined: Wed Aug 20, 2014 9:03 pm
Re: Series II/IIA body panels
Its the rear sides im after theyd need to work with a station wagon tub though. Not sure how id even get them at this point anyway
-
Troll Hunter
- Newbie
- Posts: 39
- Joined: Wed Sep 28, 2016 4:14 pm
- Location: Kaslo BC
Re: Series II/IIA body panels
Where are you located? I can deliver to Salmon Arm area, or anywhere between Kaslo and SA, eg Revelstoke, Sicamous, at end of June. Could possibly arrange transport from SA to Kelowna or Kamloops.
You'll have to measure your tub and decide if these are the correct length. I'm sorry, but I can't help you on this.
Mike
You'll have to measure your tub and decide if these are the correct length. I'm sorry, but I can't help you on this.
Mike
-
RamblerRob
- Green Laner
- Posts: 292
- Joined: Wed Aug 20, 2014 9:03 pm
Re: Series II/IIA body panels
Im over on the island unfortunately
-
TimberPig
- Bumper Sticker
- Posts: 141
- Joined: Fri Nov 11, 2016 8:00 pm
Re: Series II/IIA body panels
[quote="Troll Hunter" post_id=40913 time=1527745931 user_id=2477
Regarding the two sides, as I said, I don't know what model they came off, but they are approx 53" long. If that's what you want, then they are here. I don't know what vehicle they came from because I acquired them by saving them from going to the dump! These bits are irreplaceable, and needed to be saved! I'm not interested in keeping them because I have a 110.
Mike
[/quote]
At roughly 53" long, if the side windows slide, they are Station Wagon/Deluxe Hardtop sides (88 or 109 are the same). Fixed windows is an 88 hardtop. Series 2/2a/3 are interchangeable. Early trucks had body colour roof sides on Station Wagons, while later ones were limestone.
Hopefully this helps to find these a new home.
Regarding the two sides, as I said, I don't know what model they came off, but they are approx 53" long. If that's what you want, then they are here. I don't know what vehicle they came from because I acquired them by saving them from going to the dump! These bits are irreplaceable, and needed to be saved! I'm not interested in keeping them because I have a 110.
Mike
[/quote]
At roughly 53" long, if the side windows slide, they are Station Wagon/Deluxe Hardtop sides (88 or 109 are the same). Fixed windows is an 88 hardtop. Series 2/2a/3 are interchangeable. Early trucks had body colour roof sides on Station Wagons, while later ones were limestone.
Hopefully this helps to find these a new home.
-
Troll Hunter
- Newbie
- Posts: 39
- Joined: Wed Sep 28, 2016 4:14 pm
- Location: Kaslo BC
Re: Series II/IIA body panels
My apologies, RamblerRob, I had misinterpreted your earlier question. Yes, they are the sides and corner pieces that sit between the tub and the roof. The short section on each that goes across the rear of the vehicle is 11-1/2" to 12" long. And they have the sliding windows, which, apparently, makes them Station Wagon.
Mike
Mike
-
Troll Hunter
- Newbie
- Posts: 39
- Joined: Wed Sep 28, 2016 4:14 pm
- Location: Kaslo BC
Re: Series II/IIA body panels
Bump!
These bits are still available, but not for long, as I need to do a clear out, so they'll soon be going to the dump, unfortunately. And they're FREE!
Mike
These bits are still available, but not for long, as I need to do a clear out, so they'll soon be going to the dump, unfortunately. And they're FREE!
Mike
-
kakaducamping
- Grease Monkey
- Posts: 6
- Joined: Fri Jul 23, 2010 10:01 am
- Location: Richmond, BC
- Contact:
Re: Series II/IIA body panels
Hi Mike,
Any chance you could email a picture of what you have to matt at kakaducamping.com?
Thanks! Matt
Any chance you could email a picture of what you have to matt at kakaducamping.com?
Thanks! Matt
-
Troll Hunter
- Newbie
- Posts: 39
- Joined: Wed Sep 28, 2016 4:14 pm
- Location: Kaslo BC
Re: Series II/IIA body panels
No problem. I'll take photos tomorrow, providing it's not bucketing down, and email them to you.
Mike
Mike
-
Troll Hunter
- Newbie
- Posts: 39
- Joined: Wed Sep 28, 2016 4:14 pm
- Location: Kaslo BC
Re: Series II/IIA body panels
Now GONE - for free. Glad to have saved irreplaceable items from the dump.
But I still have six steel wheel rims for anybody who needs new wheels. They are 16" not 15", as I originally advertised, based on what the donor told me. I just want to save them also from the dump.
Mike
But I still have six steel wheel rims for anybody who needs new wheels. They are 16" not 15", as I originally advertised, based on what the donor told me. I just want to save them also from the dump.
Mike
-
Scottmck
- Grease Monkey
- Posts: 5
- Joined: Tue Oct 23, 2018 9:12 pm
Re: Series II/IIA body panels
Hi Mike, do you still have the 6 x 16” steel wheels available? Will they fit a 2004 Discovery II SE?
can you email me if possible? scott.rmckenzie [at] me [dot] com
can you email me if possible? scott.rmckenzie [at] me [dot] com
