Note: This forum is paid for and managed by the Rover-Landers of BC club. Forum registration and use is free and does not require you to join our club. However, we do encourage you to become a member and participate in our club activites. Our online club membership form is available at: Club Membership.

Leaky Block/Head

Post Reply
Message
Author
User avatar
bsa_m21
Tread Gently
Posts: 275
Joined: Mon Mar 02, 2015 1:30 pm
Location: Surrey, BC

Leaky Block/Head

#1 Post by bsa_m21 » Tue Oct 08, 2019 9:31 am

I got this tip from the BritishV8 forum http://forum.britishv8.org:

"K-Seal will seal corroded heads leaking head gaskets weeping core plugs and I dare say cracked blocks. It seals so well that it will even try to seal the drain tap when you change the coolant. Last time I drained the previous RV8, which had weeping core plugs at the back of the block, I had to remove the whole drain tap from the rad before I could get the coolant out, and it wasn't a rusted relic, it was a new tap !
www.kseal.com"


No idea if it will work, but hey, worth a try if you have a leaky block/head.
:80inch:
Martin
=======
Series/Disco Coiler Hybrid (build in progress)
'52 S1 - Runcle
'96 Discovery 1 - Hothead
'80 Triumph TR7v8 (Rover 4L) - Myrtle
(Roverlanders webmaster)

Post Reply