Note: This forum is paid for and managed by the Rover-Landers of BC club. Forum registration and use is free and does not require you to join our club. However, we do encourage you to become a member and participate in our club activites. Our online club membership form is available at: Club Membership.

series 2a or 3 wanted *FOUND*

Post Reply
Message
Author
thegoose1
Grease Monkey
Posts: 7
Joined: Thu Aug 15, 2019 12:25 pm

series 2a or 3 wanted *FOUND*

#1 Post by thegoose1 » Fri Oct 04, 2019 4:26 pm

looking for new project. had a 62 10 years ago . want another one pretty bad.
-Andrew in victoria bc

thanks all found something
Last edited by thegoose1 on Sun Oct 20, 2019 8:26 pm, edited 1 time in total.

Tony4921
Worm Gear
Posts: 180
Joined: Sun Jan 11, 2015 7:34 pm
Location: Duncan,BC

Re: series 2a or 3 wanted

#2 Post by Tony4921 » Fri Oct 04, 2019 5:22 pm

I have a 67 2A, 88in. It runs and drives good, rebuilt 2 1/4 in it, parabolic front & rear springs, roof rack & ladder. I have removed all the paint, so there is absolutely no filler in it, some bumps and scrapes (character) I just dont have the time to use it and too many projects.
Attachments
21.jpeg

British Bigfoot
Rookie
Posts: 3
Joined: Fri Jan 11, 2019 8:11 pm

Re: series 2a or 3 wanted

#3 Post by British Bigfoot » Sun Oct 06, 2019 3:28 pm

what model are you looking for?

harv
Little Wheel
Posts: 87
Joined: Mon Oct 22, 2007 9:49 am
Location: Kelowna, BC

Re: series 2a or 3 wanted

#4 Post by harv » Tue Oct 15, 2019 8:13 am

I have 1963 88" 2A shell (body on frame, on springs and axle housings on wheels, you can roll it). I always thought I'd do another project with it, but I've had it 25 years and know realize I won't.The frame is quite good, except the rear cross member is rusty (might be salvageable) and there is a weld repair on the left front area. The bulkhead is virtually rust free. The body panels are all there, quite free of corrosion, but has its share of trail rash. If you're interested, I can try to figure out how to post some photos. Being that I have the registration for it, I think it's worth $1000. If anyone thinks that's out of line please let me know.
1963 S2A 88"
1997 P38 4.6HSE
2001 Disco 2 4.0

thegoose1
Grease Monkey
Posts: 7
Joined: Thu Aug 15, 2019 12:25 pm

Re: series 2a or 3 wanted

#5 Post by thegoose1 » Tue Oct 15, 2019 10:43 am

hmm perhaps. no motor / trans running gear? what kind of top etc?

harv
Little Wheel
Posts: 87
Joined: Mon Oct 22, 2007 9:49 am
Location: Kelowna, BC

Re: series 2a or 3 wanted

#6 Post by harv » Tue Oct 15, 2019 12:06 pm

Mechanically it's quite poor. Gearbox is in pieces, transfer case/front output are intact, but not installed, both diffs have broken pieces. I have a good motor (2.25 petrol) that could go with it, though I sort of want to keep it as it's the original for the 2A I drive. Top is the standard aluminum passenger type, with the LH window missing.
1963 S2A 88"
1997 P38 4.6HSE
2001 Disco 2 4.0

m_kenton
Filbert Flange
Posts: 68
Joined: Sun Oct 15, 2006 9:25 pm

Re: series 2a or 3 wanted

#7 Post by m_kenton » Tue Oct 15, 2019 6:52 pm

Hi
I am interested if the other party passes on it. Send me a phone # so we can talk.
Thanks
Marc

mel rover
Beyond Recovery
Posts: 59
Joined: Sat Dec 04, 2010 8:51 pm

Re: series 2a or 3 wanted

#8 Post by mel rover » Tue Oct 15, 2019 7:55 pm

-Well I may have what you are looking for, I have a five door it comes with a 200 tdi and a Lt77 with a 230 transfer case. It has front disk brakes, parabolic springs and good tires.The body is in good shape as well as the frame. The rover has a new Salisbury rear end, and new shocks. I am open to offers. If you want more info give me a call. 250-498-0157 this is my house number, so if you don't catch me please leave a message.
Thanks Rob

harv
Little Wheel
Posts: 87
Joined: Mon Oct 22, 2007 9:49 am
Location: Kelowna, BC

Re: series 2a or 3 wanted

#9 Post by harv » Tue Oct 15, 2019 8:02 pm

My home phone is 250-765-6218.
1963 S2A 88"
1997 P38 4.6HSE
2001 Disco 2 4.0

thegoose1
Grease Monkey
Posts: 7
Joined: Thu Aug 15, 2019 12:25 pm

Re: series 2a or 3 wanted

#10 Post by thegoose1 » Sun Oct 20, 2019 8:23 pm

found somethings thanks all.

Post Reply